Posts Tagged ‘asphalt roofing’

The Best Types of Materials for Low Slope Roofs

Posted on: June 23rd, 2014 by cinc1234

There are numerous type roofing materials specifically designed for use on flat or low slope roofs. There are few cool roof options for gravel roofs and even less for a flat gravel roof. The only difference between low slope and flat roofing is the pitch or the slope of the roof while the flat roofing is plainly flat. Installation Cost Compared with the steeped sloped roofs, a low slope or a flat roof technically needs less material to build. The most common type of residential roof is a steep slope roof. Structural metal roofing is broken down into low slope and steep slope categories.

Standing seam metal roofs should be installed over a properly prepared roof deck. In most retrofit projects, standing seam roofs can be installed right over existing built-up roofs, eliminating costly and time-consuming tear-offs. A standing seam metal roof can be installed on a low slope roof of no less than 1 in 12 pitch. There was a time when roofs were merely installed and, after leaking, were torn off and re-roofed. Homeowners striving to attain the modern look for their homes demand standing seam metal roofs. The seam is almost indestructible when properly made, and does not fail when under water for extended periods of time.

Coated roof systems are a cost-effective solution for extending the life of an existing roof system. The best permanent solution for an existing concrete roof is The SureCoat Roof System. The perfect time to consider solar electricity is when installing a new roof. Roof replacement is often done when the roof has already passed its actually lifespan. In recent years roof coatings have become a very cost-effective alternative to full roof replacement. Foam roofing will help reduce the costs of roof replacement by preserving an existing roof design. Of all the roofing contractors in Cincinnati, Cincy Roofing will be able to best advise you on the best covering for your roof

Asphalt composition shingles are the most common type of roofing material used in the country today. There are many considerations which must be studied before applying new asphalt shingles over an existing roofing material. Rolled roofing is a sheet based material specifically made for roofs, which is made of fiberglass that is coated with asphalt. Rolled roofing or 90-pound roll roofing is fabricated the same way as asphalt strip shingles. Asphalt shingles are a roofing material produced with organic felt or glass-fiber mat as the key ingredient. The majority of the commercial roofing growth comes from the high-end fiberglass shingles, most of which is being applied on re-roofing projects.

Roof pitch or roof slope is considered the main factor in roof design. The water cannot be accumulated on sloped roof especially with a higher pitch, and the possibility of leaking significantly lower in comparison with a flat roof. The degree of roof pitch will determine which slates can be used or even whether a slate roof is advisable at all. Building codes usually allow you to add a second roof to your building if the first roof is failing. A steeper slate roof pitch will shake off rainwater and even snow but large amounts of rainwater lingering on a shallow slate roof pitch will soak into the slate. Any shallow slate roof pitch is susceptible to the wind forcing snow and rain under the slates.

Terms of Use   Linking Policy   Disclaimer   Testimonials Disclosure   Privacy Policy